HW/SW CallManager 5.1 Media Conversion Server, 0 Seats - MCS7825I2-K9-CMA2
- Supports Ethernet Fast Ethernet, Gigabit Ethernet Networking
- Data Transfer Speeds up to
The Cisco MCS 7825-I2 Unified CallManager Appliance is an integral part of a complete, scalable architecture for a new generation of high-quality IP communications solutions that operate on enterprise data networks. This powerful platform is a solution that is easy to deploy and highly cost-effective, and it delivers the high performance and availability that today's enterprise networks demand. The server appliance is preinstalled with an operating system and the Cisco Unified CallManager 5.1 application. It is fully operational upon startup, requiring entry of just a few configuration items such as IP address and domain.
The appliance includes the following features and components: Intel dual-core, Pentium D, 2.8- or 3.4GHz processor with an 800MHz front side bus (FSB) and 4MB of Layer 2 cache; 2GB of installed PC2-4200 error correction code (ECC) double data rate 2 (DDR2) synchronous dynamic RAM (SDRAM), 8GB maximum; two integrated 10/100/1000T Gigabit Ethernet network-interface-card (NIC) ports; two 80GB serial-advanced-technology-attachment (SATA) hard disk drives configured in Redundant Array of Independent Disks (RAID) level 1; no floppy diskette drive installed; quick-deployment third-party rail kit; 350W autoranging, Power Factor Correction (PFC) power supply; One rack unit (1U) (1.75 in./4.5 cm high) form factor, 22 in./56 cm deep.
HW/SW CallManager 5.1 Media Conversion Server, 0 Seats - MCS7825I2-K9-CMA2
|
General
|
|
|
Weight
|
28.000 lb(s)
|
|
Protocols
|
|
|
Networking Protocol
|
Ethernet
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Networking Protocol
|
Fast Ethernet
|
|
Actual Weight
|
28.00 lb(s)
|
|
Compatibility Notes
|
Product Specifications
Processor (CPU): Intel Pentium D dual core
Processor internal clock speed: 2.8GHz
Level 2 cache: 4MB
Maximum processors: 1
Processors installed: 1
Basic input / output system (BIOS) type: Flash
Hard Disk Specifications
Hard disk interface type: SATA
Hard disk installed: (2) 80GB
Hard disk (rpm): 7200
Hard disk average seek time: 9ms
Hard disk I/O transfer rate: 1.5Gbps
Network Interface Specifications
Ethernet network interface card (NIC): Dual onboard 10 / 100 / 1000
Ethernet connectors: Two RJ-45 connectors on rear of server
10BASET cable support: EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASETX cable support: EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASET cable support: EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
|
|
Contents
|
Unit, documentation
|
|
Memory Notes
|
Memory Specifications
Memory maximum: 8GB
Memory bus clock: 533MHz
Memory technology: PC2-4200 DDR2 synchronous dynamic RAM (SDRAM)
Bit-error mitigation: Error correction code (ECC)
Total RAM slots: 4
Memory installed: 2GB (two 1GB dual in-line memory modules [DIMMs])
|
|
Physical Dimensions
|
1.75"h x 17.3"w x 22"d
|
|
Ports/Connectors
|
Interface Port Specifications
Ethernet: 2
Serial ports: 1
Parallel ports: 0
USB 2.0 ports: 4 (2 at front and 2 at back of chassis)
Keyboard ports: 1 PS/2
Mouse ports: 1 PS/2
Audio ports: None
|
|
Power Notes
|
Maximum input power: 350W
Autoranging AC input: Yes
PFC: Yes
Input low range: 100 to 127 (nominal) VAC; 50-60Hz; 6.0A
Input high range: 200 to 240 (nominal) VAC; 50-60Hz; 3.0A
Input kVA approximately: maximum configuration 0.290kVA
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales on this item are final.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
HW/SW CallManager 5.1 Media Conversion Server, 0 Seats - MCS7825I2-K9-CMA2
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=8062759#BVSecondaryCustomerRatings