Media Convergence Server 7825-I3 Unity Connection Appliance - MCS-7825I3-K9-UCA1
- Supports Ethernet, Fast Ethernet Gigabit Ethernet Networking
- Data Transfer Speeds up to
The Cisco MCS 7825-I3 Unified Communications Manager Appliance is an integral part of a complete, scalable architecture for a new generation of high-quality unified communications solutions that operate on enterprise data networks. A solution that is easy to deploy and highly cost-effective, this powerful platform delivers the high performance and availability that today's enterprise networks demand. The server appliance is preinstalled with an operating system and the Cisco Unified Communications Manager 6.0 or 5.1 application. Formerly known as Cisco Unified CallManager, Cisco Unified Communications Manager is fully operational upon startup, requiring entry of just a few configuration variables such as IP address and domain.
The server appliance includes the following features and components: Intel Dual-Core Xeon 2.13GHz processor with a 1060MHz front side bus (FSB) and 2MB of Layer 2 cache; 2GB PC2-5300 double-data-rate 2 (DDR2) Error Checking and Correcting (ECC) memory; (2) 160GB cold-swap serial advanced technology attachment (SATA) hard disk drive configured with Redundant Array of Independent Disks (RAID) 1; dual-port Gigabit Ethernet controller (embedded); quick-deployment third-party rail kit.
Media Convergence Server 7825-I3 Unity Connection Appliance - MCS-7825I3-K9-UCA1
|
General
|
|
|
Weight
|
28.000 lb(s)
|
|
Protocols
|
|
|
Networking Protocol
|
Fast Ethernet
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Networking Protocol
|
Ethernet
|
|
Actual Weight
|
28.00 lb(s)
|
|
Compatibility Notes
|
Product Specifications
Processor (CPU): Intel Dual-Core Pentium Xeon
Processor internal clock speed: 2.13GHz (or greater)
Level 2 cache: 2MB
Maximum processors: 1
Processors installed: 1 (with 2 cores)
Basic input / output system (BIOS) type: Flash
Hard Disk Specifications
Cold-swappable bays: 2
Hard disk interface type: SATA
Hard disk installed: (2) 160GB
Hard disk (rpm): 7200
Hard disk average seek time: 9ms
Data transfer rate (burst): 150MB per second
Network Interface Specifications
Ethernet network interface card (NIC): Dual onboard 10 / 100 / 1000
Ethernet connectors: Two RJ-45 connectors on rear of server
10BASET cable support: EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASETX cable support: EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASET cable support: EIA Category 6 UTP (recommended), 5E UTP, 5 UTP (2 pair) up to 328 ft (100m)
|
|
Contents
|
Unit, documentation
|
|
Memory Notes
|
Memory Specifications
Memory maximum: 8GB
Memory bus clock: 667MHz
Memory technology: PC2-5300 667-MHz DDR2 synchronous dynamic RAM (SDRAM)
Total RAM slots: 4
Memory installed: 2GB (two 1GB dual in-line memory modules [DIMMs])
|
|
Physical Dimensions
|
1.75"h x 17.3"w x 22"d
|
|
Ports/Connectors
|
Interface Port Specifications
Serial ports: 1
Parallel ports: 0
USB 2.0 ports: 4
Keyboard ports: 1
Mouse ports: 1
Audio ports: None
Video Graphics Array (VGA) ports: 1
System management ports: None
|
|
Power Notes
|
Power-supply output power: 420W (rated steady-state power)
Autoranging AC input: Yes
PFC: Yes
Input requirements range line voltage: 90 to 264VAC
Nominal line voltage: 100 to 120VAC and 220 to 240VAC
Rated input current: 6A (100 to 120VAC) to 3A (200 to 240VAC)
Rated input frequency: 47 to 63Hz
Rated input power: at 115V input rated input power = 486W (assume output wattage = 450W); at 230V input rated input power = 479W (assume output wattage = 450W)
|
|
Returns Policy
|
Due to manufacturer restrictions, all sales on this item are final.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
Media Convergence Server 7825-I3 Unity Connection Appliance - MCS-7825I3-K9-UCA1
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=8586430#BVSecondaryCustomerRatings