EtherLite 2 - 70001430
- Supports Ethernet RS-232, TCP/IP Networking Protocol
- Data Transfer Speeds up to 230KB/s
- Warranty: 5 Years
Digi's EtherLite Terminal Server blends the control and performance of between (2) and (32) serial ports with the convenience of a 10/100 Ethernet connection (RJ-45). The EtherLite network serial concentrator connects asynchronous serial ports to your network, replacing the installation of serial adapters in servers for applications in POS/retail, process control, data collection and console management of clusters, routers, hubs, switches, PBXs and other networking devices with console ports.
EtherLite Terminal Servers are not typical Ethernet terminal servers. The traffic from all EtherLite ports is serviced by a single TCP/IP session, compared to the conventional "one session per port" method. The obvious EtherLite benefit is less overhead at the host, and less traffic across your LAN's Ethernet. EtherLite serial ports appear as local ttys under UNIX and as native COM ports under Windows NT. These locally administered, full, "hardware-style" ports allow much greater control than standard terminal server ports. EtherLite supports port speeds up to 115Kbps, ideal for handling all of today’s serial devices. Hardware and software flow control manages data flow at even higher baud rates.
EtherLite models' authentic serial ports come without the burden of Telnet, Rlogin, Reverse Telnet or other complex networking overhead. Operating system drivers (Windows NT or UNIX) are provided free with each unit on CD-ROM. Simply attach the unit to twisted-pair Ethernet cabling (Cat5), load device drivers on a UNIX or NT host, and set the IP address.
EtherLite 2 - 70001430
|
Performance
|
|
|
Data Transfer Rate
|
230 KB/s
|
|
Protocols
|
|
|
Networking Protocol
|
Ethernet
|
|
Networking Protocol
|
RS-232
|
|
Networking Protocol
|
TCP/IP
|
|
Actual Weight
|
0.40 lb(s)
|
|
Compatibility Notes
|
Multiplexes all serial ports on a single TCP / IP session, minimizing Ethernet traffic Full modem control and hardware / software flow control on all ports Stackable cabinets / optional rackmount hardware and power supply also available Surge Protection provided on all serial lines for increased reliability FLASH memory for instant field upgradability Complete, easily-installed software drivers for Windows NT and UNIX Full RAS support for Windows NT Supports DHCP for easy IP address configuration
Serial I/O - Baud rates from 75 to 230K baud. RS-232 modem control signals supported: RTS, CTS, DTR, DSR, and DCD
|
|
Contents
|
Unit, power supply, drivers, documentation
|
|
Memory Notes
|
CPU - 40MHz 80C186 embedded microcontroller EPROM - 128 FLASH at zero wait-states SRAM: 512K at zero wait states
|
|
Physical Dimensions
|
1.1"h x 6.3"w x 3.7"d
|
|
Ports/Connectors
|
(2) RJ-45 asynchronous serial ports (RS-232) (1) RJ-45 10BaseT Ethernet interface
|
|
Power Notes
|
Universal: 100-240VAC, 50-60Hz
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
System Requirements
|
AIX HP-UX Linux Windows NT Windows 2000* SCO OpenServer Sun Solaris (Intel and Sparc)
* Only available on EtherLite Models 2, 80, 160 and 162
|
|
Warranty - Labor
|
5 Years
|
|
Warranty - Parts
|
5 Years
|
EtherLite 2 - 70001430
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=148647#BVSecondaryCustomerRatings