802.11g n (Draft) 2.0 2.4 -5GHz Modulated Auto Access Point, 3 RP-TNC - AIR-AP1252G-A-K9

Cisco

Overview

Specs

802.11g/n (Draft) 2.0 2.4/-5GHz Modulated Auto Access Point, 3 RP-TNC - AIR-AP1252G-A-K9

Supports IEEE 802.11n (draft), IEEE 802.3u, IEEE 802.1x, IEEE 802.3af (PoE), IEEE 802.11g, IEEE 802.11d, IEEE 802.11a, IEEE 802.11i, IEEE 802.11b, IEEE 802.11e Networking

The Cisco Aironet 1250 Series is part of the Cisco Unified Wireless Network. The Cisco Unified Wireless Network is a comprehensive solution that unifies the wired and wireless network to deliver a common set of services and applications, providing users a single experience for any mode of network connectivity, and offering IT simplified operational management. The Cisco Aironet 1250 Series integrates seamlessly with the Cisco Unified Wireless Network. It extends the same industry-leading RF and network management capabilities as currently available across the breadth of Cisco wireless solutions.

The Cisco Aironet 1250 Series has two deployment options: controller-based (unified) or standalone (autonomous). Access points using the Lightweight Access Point Protocol (LWAPP) work in conjunction with Cisco wireless LAN controllers and optionally with the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1250 Series simplifies operations by automatically detecting the best-available Cisco Wireless LAN Controller and downloading appropriate policies and configuration information with no manual intervention. When deployed as a standalone access point, the Cisco Aironet 1250 Series delivers a baseline set of features and can later be software-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network.

This access point comes in the FCC configuration.

Protocols
Networking Protocol	IEEE 802.11n (draft)
Networking Protocol	IEEE 802.3u
Networking Protocol	IEEE 802.1x
Networking Protocol	IEEE 802.3af (PoE)
Networking Protocol	IEEE 802.11g
Networking Protocol	IEEE 802.11d
Networking Protocol	IEEE 802.11a
Networking Protocol	IEEE 802.11i
Networking Protocol	IEEE 802.11b
Networking Protocol	IEEE 802.11e
Actual Weight	5.10 lb(s)
Compatibility Notes	Compliant Standards: FCC Spread Spectrum Method OFDM, DSSS Status Indicators Status Features DoS attack prevention, Intrusion Detection System (IDS), Intrusion Prevention System (IPS), MIMO technology, Wi-Fi Multimedia (WMM) support, Lightweight Access Point Protocol (LWAPP) support Encryption Algorithm AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2 Authentication Method MS-CHAP v.2
Contents	Access point, documentation
Memory Notes	RAM Installed ( Max ) 64 MB Flash Memory Installed (Max) 32 MB flash
Ports/Connectors	Expansion Slots Total (Free) 2 ( 0 ) x expansion slot Interfaces 2 x network - Radio-Ethernet - RP-TNC x 3 1 x network / power - Ethernet 10BaseT / 100BaseTX / 1000BaseT - RJ-45 1 x management - console - RJ-45
Power Notes	AP1250: 36 to 57 VDC Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Cisco 802.11g/n (Draft) 2.0 2.4/-5GHz Modulated Auto Access Point, 3 RP-TNC - AIR-AP1252G-A-K9

Transition Networks E+M 2/4 Wire Converter Module RJ-45 to 1310TX/1550RX SSF SMF SC 20km - CEMTF1029-100

The Transition E&M or 2/4-wire phone line converter is intended to connect central-office voice grade signals to distant legacy PBX equipment utilizing E & M signaling.The E & M control circuits enable the audio transmission and provide a contact closure at the distant end. The electrical interface is provided through an RJ-45 female connector. This module supports 2 or 4...

Transition Networks E+M 2/4 Wire Converter Media Module RJ-45 to 1310NM SMF SC 20km - CEMTF1014-100

Transition Networks E+M 2/4 Wire Converter Media Module RJ-45 to 1310NM SMF SC 40km - CEMTF1015-100

Transition Networks E+M 2/4 Wire Converter Module RJ-45 to 1550TX/1310RX SSF SMF SC 40km - CEMTF1029-103

Transition Networks E+M 2/4 Wire Converter Module RJ-45 to 1550TX/1310RX SSF SMF SC 20km - CEMTF1029-101

Transition Networks E+M 2/4 Wire Converter Media Module RJ-45 to 1300NM MMF SC 2km - CEMTF1013-100

Black Box PS/2 Server Access Module for ServSelect III VM KVM Switch - KV124A-PS/2

This is a PS/2 Server Access Module for your ServSelect III VM KVM Switch (available separately). It is powered by the connected server, and the modules keep alive even if the KVM Switch loses power. One should be ordered for each switch-to-server connection. The module features a built-in KVM connector. All you need is CAT5/5e/6 cable to link your ServSelect...

3Com S5600 2-Port 10GE XFP Interface Module - 0231A41A

This is a 2-port 10GE XFP Interface Module from 3Com.

3Com S7900E 2-Port 10GBase-X XFP Module - 0231A92Q

This is a 2-Port 10GBase-X XFP Module for the 3Com S7900E Switch.

Connectgear 2/4 Way A/V Selector w/ S-Video (2-IN, 4-OUT) - AVS24

ConnectGear's 2/4-Way A/V Selector with S-Video (AVS24) offers a simple way to provide audio/video broadcasting from two different sources.

Ordering Information

Price: $829.00

Status: In Stock
Est. Ship: Ships Today
Item #: 8145407

Mfr Part #:

AIR-AP1252G...

Mfr Part #:

AIR-AP1252G-A-K9

802.11g n (Draft) 2.0 2.4 -5GHz Modulated Auto Access Point, 3 RP-TNC - AIR-AP1252G-A-K9

Cisco

Ordering Information

Hot Deals