IMS-4000 Humidity Sensor - IMS-4820

Sensaphone

This humidity sensor connects to your existing IMS-4000 Host or Node via an RJ-45 jack. Because the sensor utilizes your existing Category-5 structured wiring system, no special wiring or schematics are needed to install them. Simply locate where you want to place the sensor, attach a standard patch cable, plug it into your patch panel and do the same in your server room to connect your sensor to the IMS-4000. It’s no different than wiring up a workstation or a printer.

Once connected, the IMS-4000 will automatically recognize the type of sensor installed and configure it for you, using a standard template that you can modify. Because the IMS-4000 supplies power and configuration data for each sensor, the IMS-4000 can detect faults with your sensors: If there’s a cable disruption or your sensor is accidentally unplugged, you’ll know it.

Contents	Humidity sensor, documentation
Other Requirements	Requires Sensaphone's IMS-4000 Host or Node (sold separately).
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Sensaphone IMS-4000 Humidity Sensor - IMS-4820

Sensaphone IMS-4000 Humidity Sensor with LCD Readout - IMS-4821

This humidity sensor with LCD readout connects to your existing IMS-4000 Host or Node via an RJ-45 jack. Because the sensor utilizes your existing Category-5 structured wiring system, no special wiring or schematics are needed to install them. Simply locate where you want to place the sensor, attach a standard patch cable, plug it into your patch panel and do...

Sensaphone IMS Room Humidity Sensor - 4820

Designed to connect to the IMS-4000 Host or Node and monitor indoor humidity levels, the IMS-4820 connects to your Host or Node via RJ-45 patch cable (not included) to measure humidity levels from 0100% RH.The sensor may be mounted either on a wall or to a single-gang electrical box.

Sensaphone Humidistat Wall Mount Humidity Sensor - FGD-0027

This is a wall mount humidity sensor designed to detect if humidity is too high or too low. Alarm limites are adjustable from 10 to 60 percent and it works with all Sensaphone products.

Sensaphone IMS-4000 Power Sensor (110/220VAC) - IMS-4840

This 110/220VAC power sensor connects to your existing IMS-4000 Host or Node via an RJ-45 jack. Because the sensor utilizes your existing Category-5 structured wiring system, no special wiring or schematics are needed to install them. Simply locate where you want to place the sensor, attach a standard patch cable, plug it into your patch panel and do the same...

APC Temperature and Humidity Sensor - AP9335TH

This is a temperature and humidity sensor for use with APC solutions.

Avocent EVR1500 External Humidity Sensor - EVR-HS

This is an external humidity sensor for the EVR 1500.

APC LCD Digital Temperature and Humidity Sensor - AP9520TH

This digital temperature and humidity sensor is for monitoring levels within a rack or room. The unit features an LCD display that scrolls through three status screens at three-second intervals.

APC NetBotz Humidity Sensor HS100 15ft 4.6m - NBHS0100

Extend the capabilities of your environmental and security monitoring appliances with the NetBotz Humidity Sensor.

Chatsworth Products Room Humidity Sensor, No Display for RIM-600 - 60030-001

This Humidity Sensor allows you to monitor relative humidity in a room or cabinet. Its range of measurement is 0 to 100% RH with an accuracy of +/- 5%. It is in a white plastic housing, mounts on a wall, flat surface, or in a single gang box. It is for indoor use only. The device has no display.