Smart-UPS VT 10kVA 208V UPS HW Input/Output (1) Battery Module Expandable to (4), Int Maint Bypass - SUVTP10KF1B4
- Provides 10000VA, 8000VA, 230VA power / Surge Suppression is Standard
- Connector(s): Power Hard Wire 5-wire (3PH + N + G) / 2 Outlets
- 5.5 minute(s) Battery Runtime at Full Load / Attributes include Double conversion online
Smart-UPS VT offers centralized three-phase power protection with the reliability of the award winning Smart-UPS family. Ideal for small data centers, large retail stores, regional offices, and laboratory equipment, the Smart-UPS VT features dual-mains input, automatic bypass, and scalable runtime with hot-swappable batteries for increased availability. Low cost of ownership is achieved through best-in-class efficiency and a reduction in rating of electrical infrastructure - wires, transformers, and generators. APC's Network Management Card with temperature monitoring provides remote monitoring and management through Web/SNMP. Serviceability is greatly enhanced with its user-replaceable batteries and manageable extended run frames. The Smart-UPS VT is the easiest UPS in its class to deploy, manage and maintain.
Smart-UPS VT 10kVA 208V UPS HW Input/Output (1) Battery Module Expandable to (4), Int Maint Bypass - SUVTP10KF1B4
|
Connectivity
|
|
|
Communication Interface
|
Ethernet
|
|
Connector
|
Power Hard Wire 5-wire (3PH + N + G)
|
|
# Ports
|
2
|
|
General
|
|
|
Attributes
|
Double conversion online
|
|
Form Factor
|
Tower
|
|
Power
|
|
|
Battery Run Time (max)
|
5.5 minute(s)
|
|
Power Provided
|
10000 VA
|
|
Power Provided
|
8000 VA
|
|
Power Provided
|
230 VA
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
1115.00 lb(s)
|
|
Compatibility Notes
|
Pre-Installed SmartSlot card: AP9619
Control panel: multi-function LCD status and control console
Audible alarm: Audible and visible alarms prioritized by severity
Emergency Power Off (EPO): Yes
|
|
Contents
|
UPS, battery module, power modules, bolt-down brackets, Web / SNMP management card, software, documentation
|
|
Physical Dimensions
|
59"h x 20.6"w x 36.4"d
|
|
Ports/Connectors
|
(1) Hard Wire 5-wire (3PH + N + G) power out
(1) Screw Terminals power out
(1) Hard Wire 5-wire (3PH + N + G) power in
(1) Smart-Slot (occupied)
|
|
Power Notes
|
Output power capacity: 8000W/10000VA
Maximum configurable power: 8000W/10000VA
Nominal output voltage: 120VAC, 208VAC, 208VAC 3PH
Output voltage note: configurable for 208 and 220VAC - 3 Phase
Efficiency at full load: 93.40%
Output voltage distortion: less than 5% at full load
Output frequency: 57-63Hz for 60Hz nominal
Crest Factor: Unlimited
Waveform Type: Sine wave
Output Voltage Tolerance + / -1% static and + / - 5% at 100% load step
Built-in Maintenance Bypass
Built-in Static Bypass
Nominal input voltage: 208VAC 3PH
Input frequency: 40-70Hz
Input voltage range for main operations: 165-240VAC
Other input voltages: 220VAC
Maximum input current: 27A
Input breaker capacity: 35A
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included battery modules: (1)
Available battery slots: (3)
Typical recharge time: 5 hours
Replacement battery cartridge: SYBT4
RBC quantity: (1)
Nominal Battery Voltage: + / -192VDC (split battery referenced to neutral)
Discharge battery voltage: + / -154VDC
Typical backup time at half load: 18 minutes (4000 Watts)
Typical backup time at full load: 5.5 minutes (8000 Watts)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
Smart-UPS VT 10kVA 208V UPS HW Input/Output (1) Battery Module Expandable to (4), Int Maint Bypass - SUVTP10KF1B4
1
Year PC Connection Consumer Electronic Coverage ($7,501 - $10,000), EXT
2
Year PC Connection Consumer Electronic Coverage ($7,501 - $10,000), EXT
Smart-UPS VT 10kVA 208V UPS HW Input/Output (1) Battery Module Expandable to (4), Int Maint Bypass - SUVTP10KF1B4
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=8651861#BVSecondaryCustomerRatings