SmartOnline Modular 40kVA/32kW 120/208VAC 3-Phase UPS Hardwire Input/Output - SU40K
- Provides 40000VA, 32000watt(s) power / Surge Suppression is Standard
- Connector(s): Hardwired / 1 Outlets
- 5.5 minute(s) Battery Runtime at Full Load / Attributes include Automatic voltage regulation (AVR), Double conversion online
Tripp Lite's SU40K (40kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU40K provides two self-contained, redundant 20kVA power modules that can be hot-swapped (with the load powered) if maintenance is required. Connect two SU40K models in parallel (1+1 configuration) to provide fail-safe redundancy (two 40kVA models supporting a 40kVA load) or to increase capacity (two 40kVA models supporting an 80kVA load).
The SU40K provides mission-critical equipment with the highest level of power protection available. This Large capacity 40,000VA/32,000W UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time assures compatibility with all equipment types. The SU40K's high input power factor, advanced IGBT inverter technology and Digital Signal Processor (DSP) technology produce less than 3% input Total Harmonic Distortion (THDi). With low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to the equipment load (1:1 ratio). Extremely efficient operation (up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU-style power connections. The SU40K features 120/208VAC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 94-150/163-260VAC. Frequency is 50 or 60 Hz (auto-selectable). The SU40K combines internal power and battery components in a single small-footprint tower module.
Battery runtime can be extended with optional stand-alone hardwired external battery modules (Models BP480V26B and BP480V40C with matching battery cabinets, available separately). A manual bypass breaker and an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with the included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an internal SNMP card (Model SNMPWEBCARD, available separately) for remote shutdowns, reboots and more. A front panel combination LCD/LED display alerts you to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed.
A 1-year limited warranty is included and a start-up service program (available separately) is recommended to enhance the reliability of the installation.
SmartOnline Modular 40kVA/32kW 120/208VAC 3-Phase UPS Hardwire Input/Output - SU40K
|
Connectivity
|
|
|
Communication Interface
|
Serial (RS-232)
|
|
Connector
|
Hardwired
|
|
# Ports
|
1
|
|
General
|
|
|
Form Factor
|
Tower
|
|
Attributes
|
Automatic voltage regulation (AVR)
|
|
Attributes
|
Double conversion online
|
|
Power
|
|
|
Battery Run Time (max)
|
5.5 minute(s)
|
|
Power Provided
|
40000 VA
|
|
Power Provided
|
32000 watt(s)
|
|
Surge Suppression
|
Standard
|
|
Actual Weight
|
1512.50 lb(s)
|
|
Compatibility Notes
|
LEDS ALARMS & SWITCHES
Front panel LEDs: SELECTABLE LCD DISPLAY: displays Real-Time Event Log with up to 500 events listed. Also indicates a wide range of UPS operational and fault / warning conditions including operational mode, alarm / shutdown conditions, input / output voltage / frequency, battery voltage, load percentage and more. 4 LED DISPLAY: normal AC input, on battery power, bypass input and fault condition
Alarms: Alarms signal a variety of operational conditions: low battery, overload, shutdown, bypass and more
Switches: ON button turns UPS's inverter ON. OFF button turns UPS's inverter OFF. LCD Display Control Buttons browse through and select items displayed on LCD screen. Emergency Power Off button turns UPS output OFF and disables Bypass output. Manual Bypass breaker bypasses the UPS's inverter during maintenance
SURGE / NOISE SUPPRESSION
AC surge suppression: 4675 joules
AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes
|
|
Contents
|
UPS, software with cabling, parallel cable for 1+1 operation, documentation
|
|
Physical Dimensions
|
66.9"h x 20.5"w x 33.7"d
|
|
Ports/Connectors
|
Outlet quantity / type: hardwire
Input connection type: hardwire
|
|
Power Notes
|
Voltage compatibility: 120 / 208VAC, 3-phase, 4-wire (plus ground), wye
Frequency compatibility: 50 / 60 Hz (auto-selectable)
OUTPUT
Output capacity: 32kW/40kVA
Output nominal voltage: 120 / 208VAC, 3-phase, 4-wire (plus ground), wye
Output voltage regulation: Maintains pure sine wave output at all times, regulated within 1% of nominal output voltage, less than 3% total harmonic distortion (using IGBT Inverter)
Output frequency regulation: Regulates line frequency at 50 or 60Hz, + / - 7%
INPUT
Maximum input current: 97A (per phase, on-line)
Recommended electrical service: 120 / 208VAC (3-Phase, 4 Wire, wye)
BATTERY
Full load runtime: Included internal batteries: 5.5 min. (32, 000W)
Half load runtime: Included internal batteries: 13 min. (16, 000W)
Expandable battery runtime: Supports extended runtime with optional stand-alone external battery modules (Models BP480V26B and BP480V40C)
DC system voltage: 480VDC
Typical battery lifespan: 3-6 years, depending on usage
Battery recharge rate: 2-4 hours to 90%
VOLTAGE REGULATION
Voltage regulation description: On-line, double-conversion process enables UPS to maintain output voltage within + / -1% of nominal voltage at all times
Overvoltage correction: Maintains continuous operation without using battery power during overvoltages to 150 / 260VAC (3-Phase, 4-Wire, wye), reducing output within 1% of nominal
Brownout correction: Maintains continuous operation without using battery power during brownout / undervoltage conditions to 94 / 163VAC (3-Phase, 4-Wire, wye)
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
SmartOnline Modular 40kVA/32kW 120/208VAC 3-Phase UPS Hardwire Input/Output - SU40K
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=8574471#BVSecondaryCustomerRatings