Ti30 Thermal Imager
The Fluke Ti30 Thermal Imager is just what you need to make an effective predictive maintenance program easy, fast, accurate and affordable. It’s the tool you’ll reach for again and again for scheduled inspections, quick spot checks, and everything in between. Start or enhance your predictive maintenance program with the imager that gives you the features, software, and temperature range without the big price tag.
The Fluke Ti30 Thermal Imager uniquely supports thermography inspection routing. After the first inspection, the images taken can be combined in the InsideIR software with location names and temperature data, and uploaded to the imager for use as a routing guide. During subsequent inspections, an on-camera display prompts the user exactly where to take images, improving accuracy. The new images are easily compared to previous scans, helping to identify potential problems before they cause failure.
Maintenance personnel can quickly and easily capture high-quality infrared images using the Fluke Ti30 Thermal Imager. Because the camera collects 12 bits of information for every one of its 19,200 pixels, users in the field can simply point, focus and shoot. With a properly composed, well-focused image, all further analysis can be performed with the InsideIR software in the quiet, comfort and safety of an office.
Ti30 Thermal Imager
|
Actual Weight
|
2.20 lb(s)
|
|
Compatibility Notes
|
Thermal Specs
Temperature Range: -10 to 250 degrees C (14 to 482 F)
Detector type: 120 x 160 thermal element focal plane array (FPA) uncooled microbolometer
Accuracy: + / -2% or + / -2 degrees C
Accuracy (from -10 to 0 C): + / -3 degrees C
Repeatability: + / -1% or + / -1degrees C (+ / -2 degrees F) whichever is greater
NETD: 200 mK
Temperature Indication Resolution: 0.1 (F or C)
Optical / IR
Spectral Range: 7-14 microns
Target Sighting: Single Laser Dot (Meets IEC Class 2 & FDA Class II requirements)
Optical Resolution: 90:1
Slit Response Optical Resolution: 225:1
Minimum Diameter Measurement Spot: 7mm (0.27”) at 61cm (24”)
Image Frame Rate: 9 Hz (20 Hz for USA and Canada)
Field of view (FOV): 17º Horizontal x 12.8º Vertical
Instantaneous Field of view (IFOV): 1.9mrad
Controls
Focus: Focusable, 61cm (24”) to infinity
Temperature Scale: degrees C or F selectable
Palettes: Gray, Ironbow or Rainbow selectable
Measurement Modes: Automatic, Semi-Automatic, or Manual selectable
Laser On/Off: included
Gain Control: included
Level Control: included
LCD Backlight: Bright, Dim, Off selectable
Operational
Adjustable Emissivity: 0.10 to 1.00 by 0.01
Liquid Crystal Display: TFT technology optimized for both indoor and outdoor use, 59mm (2.3 in) x 54mm (2.1 in)
Reflected Background Temperature: -50 to 460 degrees C (-58 to 860 F)
Ambient Operating Temperature: -10 to 50 degrees C (14 to 122 F)
Relative Humidity: 10 to 90% Non-condensing
Storage Temperature: -25 to 70 degrees C (-13 to158 F) without batteries
Storage Capacity: 100 images
Laser On Icon: included
Low Battery Icon: included
Palette Icon: included
Measurement Mode Icon: included
Thermal Analysis Software: InsideIR (included)
PC Software Operating Systems: Microsoft Windows 98, Windows 2000, or Windows XP
|
|
Contents
|
Unit, docking station, power adapter, carry case, USB cable, rechargeable battery pack, carry pouch, wrist strap, software, documentation
|
|
Power Notes
|
Power: (6) AA batteries (not included) or rechargeable battery pack (included)
Battery Life: Min. 5 hours continuous use
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
Ti30 Thermal Imager
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=7757866#BVSecondaryCustomerRatings