IDE JBOD RAID PCI-Express Controller

Item #: 7749591
Mfr. Part#: ADIDEPXRJ
Availability: On Order
Est. Ship: Call for Availability
IDE JBOD/RAID PCI-Express Controller - ADIDEPXRJ

    The IDE JBOD/RAID PCI-E controller provide a simple and economical solution adding extra IDE channel, RAID and JBOD capability to any Desktop system. Designed to install into the latest PCI-Express slot of either a standard height or low profile PC, this controller can be used to connect two IDE or ATAPI devices or a combination of each in master/slave configuration.

    The onboard firmware enables easy set up of the two hard drives as RAID 1 for real time backup, as RAID 0 for high performance or as JBOD to combine the capacity of the two hard drives into one large volume. The support of the fastest ATA133 also ensures the highest data throughput when connect to any IDE hard drive.

    I/O Ports: (1) 40-pin IDE connector.
    Interface: PCI Express compatible.
    48-bits LBA to Support HDD larger than 137GB.
    Supports 1-lane 2.5Gbps PCI Express.
    Installs into both standard height or low profile systems.
    On board firmware support for RAID 0, RAID 1, JBOD.
    Support ATA33/66/100/133.
    Supports full speed burst transfers on the ATA bus.
    Supports up to UDMA6 transfer mode.
    Support ATAPI.
    Bootable.
    Pin header on board for drive access LED connection.

    Ordering Information

    Price:
    $40.74
    Quantity: