ESU 120E DB15 to BNC-Adapter Cable

This is an adapter cable with R-SMA (M) to RP-BNC (F) connectors. It is required in order to use an R-BNC 2.4GHz antenna with Symbol's wireless access point (P/N AP-5131).

How do you get from here to there if your GARMIN GPS has an MCX connector but your GARMIN external antenna has a BNC connector? Bridge the difference with this MCX to BNC adapter. When you want to connect any of the Garmin BNC type antennas (such as the GA26C or the GA29) to your Garmin GPS unit that has...

This is a 6 foot ESU and IQ Probe V.35 adapter cable. It features a male DB-25 to male V.35 connector.

This is a 15 foot future bus to AMP adapter cable for the MX2820 high density M13 multiplexer.

The ADTRAN ESU 120e is a modular, full featured E1-Fractional E1 Multiplexer that supports a wide range of end-user applications.

This is a DB 15 to RJ-45 adapter cable.

This MSA32 Inter-Panel Cable for DB15 and BNC Termination is designed for use with your Nortel Multiservice Switch 7400 model.

This molded, multimode adapter cable for the MX2820 high-density M13 multiplexor features a future bus (with locking tab and screw) to a female AMP connection. It is 10-feet in length.

This is a 3 foot future bus to stub patch cable for the MX2820 high density M13 multiplexer.

Finally, you can make good use of available USB upstream ports on your PC, and free-up the parallel port for devices like your Zip drive. Use the USB to Centronics 36 male adapter cable to attach your legacy IEEE 1284 bi-directional printer, and forget the hassles of IRQ sharing. That's the beauty of USB. The Lastar USB to Parallel adapter...