Print page E-mail page

1-Port Serial Interface Card

More From: Cisco

Item #: 47580

Mfr. Part#: WIC-1T=

Availability: In Stock

Est. Ship: Available - Ships in 24 Hrs

Expand the capabilities of your Cisco 3600 series router.

Overview

Specs

Reviews

1-Port Serial Interface Card - WIC-1T=

Supports RS-232, RS-449 RS-530, V.35, X.21 Networking
Remote Management over SNMP
Warranty: 1 Year

This modular card slides into a WAN Interface Card slot in a Combination Network Module on either a Cisco 3620 or 3640 router. It offers one DB-60 serial port for connecting to one of the following types of equipment:
An asynchronous modem, if connecting to an analog telephone line; a synchronous modem, channel service unit/data service unit (CSU/DSU), or other data circuit-terminating equipment (DCE), if connecting to a digital WAN line; or a serial transition cable (or serial adapter cable) is required.

Protocols
Networking Protocol	RS-232
Networking Protocol	RS-530
Networking Protocol	X.21
Networking Protocol	V.35
Networking Protocol	RS-449
Remote Management Protocol	SNMP
Compatibility Notes	Cisco 1600, Cisco 1700, Cisco 2600XM, Cisco 2691, Cisco 3631, Cisco 3725, Cisco 3745
Contents	(1) Serial Interface Card
Ports/Connectors	Interfaces 1 x serial - 60 pin D-Sub (DB-60) Compatible Slots 1 x expansion slot
Returns Policy	Due to manufacturer restrictions, all sales on this item are final.
Warranty - Labor	1 Year
Warranty - Parts	1 Year

Related to Cisco 1-Port Serial Interface Card - WIC-1T=

Cisco 1-Port Serial High-Speed WAN Interface Card for 1800, 2800, 3800 - HWIC-1T

This serial high-speed WAN interface cards (HWIC) helps customers enable applications such as WAN access, legacy protocol transport, console server, and dial access server. Customers can mix and match HWICs to tailor cost-effective solutions for common networking problems such as remote network management, external dial modem access, low-density WAN aggregation, legacy protocol transport, and high-port-density support.

Cisco Refurb. 1600/1700/2600/3600 Series Router 1-Port T1/Frac T1 DSU/CSU WAN Interface Card - WIC-1DSU-T1-RF

Save space and use less cabling while still gaining a powerful DSU/CSU in this 1-port WAN Interface Card from Cisco Systems.

Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW)

The Cisco 4-port 10/100BaseT Fast Ethernet Switch WAN Interface Card (WIC-4ESW) for Cisco 1700 Series modular access routers is an intelligent managed switch, offering small businesses and enterprise small branch office customers the option to integrate LAN switching and routing into one platform.

Cisco 12-in-1 Smart Serial Interface Cable, Female DCE - CAB-SS-530AFC-EXT=

This is a spare 12-in-1 smart serial interface female DCE cable.

Cisco 2600 2 Port Serial WAN Interface Card - WIC-2T=

The dual-port Async/Sync serial WAN interface card (WIC) is intended for use with the Cisco 2600 routers. It provides (2) serial WAN interface ports.To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more, call your account manager or 1-800-800-0014...

Cisco 1-Port G.SHDSL Wireless Interface Card with 4 Wire-SUP - WIC-1SHDSL-V3

The G.SHDSL WAN interface card (WIC) provides 1-port symmetric high-bit-rate DSL (SHDSL) connectivity to a WAN. G.SHDSL technology offers customers high-speed, symmetrical WAN connectivity at a lower monthly cost than most traditional WAN circuits. Cisco access routers with a SHDSL interface card can provide businesses the necessary bandwidth for critical traffic such as voice and videoconferencingService providers can increase subscriber...

Cisco 2600 Series Router 2-port Serial WAN Interface Card - WIC-2A/S=

Cisco dual port serial WAN interface cards provide serial connections to remote sites or legacy serial network devices such as SDLC concentrators, alarm systems, and POS devices.

Cisco 1-Port 4-Wire 56/64Kbps CSU/DSU WAN Interface Card - WIC-1DSU-56K4eql

The 1-port 4-wire 56/64 kpbs Channel Service Unit/Data Service Unit (CSU/DSU) WAN interface card (WIC) (WIC-1DSU-56K4) is combined within a single WIC and performs the CSU/DSU functions for both DDS (dedicated) and 4-wire switched 56 kbps data networks. It also provides an all rate synchronous interface to any dedicated Digital Data Service (DDS) point-to-point or multi-point network compatible with AT&T...

Cisco 2-port Voice Interface Card, E+M - VIC2-2E/M

This 2-port E&M voice/fax interface card is used to connect to PBX or key system as tie lines.Cisco IP Communications voice/fax network modules support either one or two Cisco voice interface cards (VICs) or Cisco voice/WAN interface cards (VWICs) and install into network module slots for the Cisco 2600XM Series, Cisco 2691, and Cisco 3600 and 3700 series voice gateway...

Cisco 2-port Voice Interface Card FXO / Universal - VIC2-2FXO=

This 2-port FXO voice/fax interface card (universal card for all countries) also supports analog Centralized Automated Message Accounting (CAMA) on any port. The FXO port is used to connect to a PBX or key system, or to provide off-premises connections to PSTN or PTT. This card supports battery reversal detection and caller ID. Cisco VICs can be software configured to...