Print page E-mail page

Magnum VS 100 with SNMP, (4) 30A Circuit Breaker Distribution

More From: APC

Item #: 8228464

Mfr. Part#: DCM00K06S4X30

Availability: On Order

Est. Ship: Call for Availability

Magnum VS 100 with SNMP, (4) 30A Circuit Breaker Distribution - DCM00K06S4X30

The APC Magnum VS is a modular -48 Vdc power plant. The Magnum VS has unique features that make it easy to install, maintain, and upgrade. The Magnum VS 100 is a dual shelf system and can support up to 10, 10A rectifiers, for a rated current of 100A. The rectifier units are modular and .hot-swappable. making it easy to add or remove rectifiers as dictated by capacity requirements, without having to change the input or output wiring.

The DC output distribution module includes terminals to connect a battery string and a low voltage disconnect (LVD) device to disconnect the batteries after a deep discharge. The system controller module provides monitoring and control functions for each component of the system, and stores alarm events for system diagnosis and maintenance. The system controller module enables the user to change/update Magnum VS settings, as well as monitor the system via a local computer directly connected to the Magnum VS system using the provided serial cable )please note that a standard serial cable cannot be used; the APC-provided serial cable must be used to connect directly to the Magnum VS system)), or a remote computer connected to the system over a network using a 10/100 Base-T Ethernet connection.

General
Form Factor	Rack-mountable
Actual Weight	39.60 lb(s)
Compatibility Notes	Communications & Management Control panel: LED status display of rectifier healthy, Network link status LED Visible Alarms: Current Limit, Distribution Failure, Input OK, Major Alarm, Minor Alarm, Output OK, Over Voltage, User Defined Form C Relay Alarms: Major Alarm, Minor Alarm, User Defined
Contents	Unit, rack mounting brackets, documentation
Physical Dimensions	10.5"h x 17.25"w x 13"d
Power Notes	Output Output Power Capacity: 500 Watts / 10.0 VA Maximum Configurable Power: 5000 Watts / 105.0 VA Grounding Polarity: Positive ground Grounding Options: Positive ground Low Voltage Disconnect: Battery circuit LVD Options: None, battery circuit Factory Set Voltage: 54.0 Input Nominal Input Voltage: 100V, 120V, 200V, 208V, 230V Input Frequency: 47 - 63Hz Input voltage range for main operations: 88 - 264V Input Power Factor at Full Load: 0.99 Maximum Input Current per phase: 5.5A Input Overcurrent Protection: Integral fuse in each rectifier
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
Warranty - Labor	2 Years
Warranty - Parts	2 Years

Related to APC Magnum VS 100 with SNMP, (4) 30A Circuit Breaker Distribution - DCM00K06S4X30

APC Magnum VS 100A with SNMP, (2) 60A CB Distribution - DCM00K06S2X60

Modular, rack-mountable DC power plant for low power wireless/cellular, customer premises and distributed networks applications.

APC Magnum VS 50 Modular Rack-Mountable DC Power, SNMP, GMT Fuses - DCM00K03SGMT

This DC Power Plant from APC has unique features that makes it easy to install, maintain, and upgrade. The rectifier units are modular and truly ? hot-pluggable? into the shelf assembly without any separate AC wiring. The Magnum VS 50 has (1) shelf which can hold up to five rectifiers for a rated current of 50 A.All system settings are...

APC Magnum VS 50 Modular Rack-Mountable DC Power, SNMP, 2X30A Distribution - DCM00K03S2X30

Modular, rack-mountable DC power plant for low power wireless, customer premise and distributed network applications

Cisco Automatic Circuit Breaker, 30A - CSCO-CKT-BRK

This is a 30A circuit breaker made by Cisco.

Cisco Expansion Panel with Circuit Breakers for AC/DC Power Solution - CSCO-EXP-PANEL

This expansion panel is designed for use with your Cisco AC/DC Power Solution. It includes two 30A circuit breakers installed in A1/B1 positions.

APC - Cables 10/100/1000BaseTX Cat5e UTP Crossover Cable 100ft Gray - 47180GY-100

This Category 5 enhanced (Cat5e) crossover patch cable from APC features molded, snagless boots and 568B wiring. Both connectors are RJ45 male. This cable is made with 4-pair, 24AWG stranded, unshielded twisted pair (UTP) wire with a PVC outer jacket.

Cisco (1) 10/100 Ethernet 1 4/16 Token-Ring 2 WAN Card Slot NM for 3600 - NM-1FE1R2W=

This module is designed as a component for Cisco's 3600 Modular, High-Density Access Routers [(1) 10/100 Ethernet, (1) 4/16 Token Ring, (2) WAN Card Slot NM, Mfr. Part# NM-1FE1R2W=]. To maximize the performance of your Cisco hardware, Cisco strongly recommends Cisco SMARTnet Support. SMARTnet provides you with technical support, access to essential information, and advanced hardware replacement. To learn more,...

APC NetShelter VS 25U Split-Rear Door 600mm Wide Black - AR8387BLK

This APC NetShelter VS 25U Split-Rear Door, 600mm wide in black, can be added to your existing rack if requirements change.

APC Smart-UPS VT Extended Run Enclosure with Breaker, (6) Battery Modules - SUVTBXR6B6S

This is an APC Smart-UPS VT Extended Run Enclosure with circuit breaker and (6) battery modules.

Eaton APS6-059 6U RM Chassis (4) 25A, (4) 6A Circuit Breakers, Battery Connection, Up to (6) Rectifiers - APS6-059-0

This Powerware Access Power Solution is the ideal 24V or 48V DC power system solution for low to medium power telecom and data applications. The power systems are designed for applications requiring compact solutions including Power-over-Ethernet (PoE)/powered LAN and Internet telephony/Voice-over-IP (VoIP) systems. This 19? rack mount system is available with up to (6) 24V or 48V rectifier modules, with...