Motherboard, 5100, Dual QC Xeon, 1333MHz, ATX, Max 32GB DDR2, 3PCIEX8, 3PCI, 2GBE, Vid, SAS, SATA - MBD-X7DCL-3-O
- Intel 5100 chipset supports 2 compatible processors
- Up to 48GB DDR2 SDRAM
- ATX form factor
Supermicro's 5100 chipset-based serverboard products support the next-generation quad-core Xeon 5400/5300 (Harpertown/Clovertown) and dual-core Xeon 5200/5100 (Wolfdale/Woodcrest) processors. With up to 32GB DDR II memory, increased PCI-Express slot capability, and new intelligent management support, these Supermicro server boards are ingeniously designed in various optimized models.
Motherboard, 5100, Dual QC Xeon, 1333MHz, ATX, Max 32GB DDR2, 3PCIEX8, 3PCI, 2GBE, Vid, SAS, SATA - MBD-X7DCL-3-O
|
General
|
|
|
Motherboard Form Factor
|
ATX
|
|
Mainboard Type
|
Server
|
|
Memory
|
|
|
Cache Memory (installed)
|
0 MB
|
|
RAM (installed)
|
0 GB
|
|
RAM (max)
|
48 GB
|
|
RAM Technology
|
DDR2 SDRAM
|
|
Processor
|
|
|
Chipset Type
|
Intel 5100
|
|
Compatible Processors
|
Xeon DC
|
|
Compatible Processors
|
Xeon QC
|
|
# Processors Installed
|
0
|
|
# Processors Supported
|
2
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller Type
|
SAS
|
|
Storage Controller Type
|
SATA 3.0 Gbps
|
|
Video
|
|
|
Video Card
|
XGI Z9
|
|
Video RAM (installed)
|
32 MB
|
|
Compatibility Notes
|
RoHS Compliant 6 / 6, Pb Free
Chassis optimized for X7DCL-3: 1U Chassis: CSE-813MTQ-520C CSE-813MTQ-280C CSE-813MT-420C CSE-813MT-410C 2U Chassis: CSE-823TQ-550LP CSE-823T-550LP CSE-823MTQ-R700LP CSE-825TQ-R700LP CSE-825TQ-560LP CSE-825MTQ-R700LP Mid Tower: CSE-733TQ-645 CSE-733TQ-465 Tower / 4U Rackmount: CSE-743T-645 Processor: System Bus 1333 / 1066 MHz system bus Dual 771-pin LGA Sockets Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below: Quad-Core Intel Xeon Processor 5400 / 5300 sequence (Harpertown/Clovertown processor) up to 3.16GHz Dual-Core Intel Xeon Processor 5200 / 5100 sequence (Wolfdale / Woodcrest processor) up to 3.40GHz
|
|
Contents
|
Motherboard, cables, I/O shield, software, documentation
|
|
Memory Notes
|
0GB Dual channel ECC Registered single rank DDR2 667, 533 MHz SDRAM up to 48GB. There are six (6) 240 pin DIMM slots.
Video memory: 32MB
|
|
O/S Notes
|
Supports 64-bit Operating Systems Supports 32-bit Operating Systems
|
|
Physical Dimensions
|
12.1" x 10"
|
|
Ports/Connectors
|
Expansion slots: (2) x8 PCI-e slots, (1) x4 PCI-e (using x8) slot, (3) 32-bit PCI slots
On board devices: Chipset: Intel 5100 (San Clemente) chipset, Intel ICH9R SAS: - LSI SAS1068E - RAID 0, 1, 10 support - (Optional: AOC-IButton68) RAID 5 support SATA: - Intel ICH9R SB SATAII Controller - RAID 0, 1, 5, 10 support (Windows only) - RAID 0, 1, 10 support (Linux) IDE: - Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card - Supports UDMA Mode 5, PIO Mode 4, and ATA/100 - Compact Flash (40-pin connector, IDE 1, single channel) slot IPMI: - Support for Intelligent Platform Management Interface v.2.0 / 1.5 - 200-pin IPMI slot (SIMLC) - (Optional: AOC-SIMLC) LAN: - Intel 82573V & 82573L Gigabit Ethernet Controller - Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Graphics: XGI Z9 with 32 MB of video memory Super I/O: Winbond 83627DHG chip Clock Generator: CK505 chip (1) Floppy controller; 1.44 MB, 2.88 MB
I/O: (2) RJ45 LAN ports USB: - (2) USB rear ports - (3) USB internal header - (5) total USB ports, 2.0 Compliant / 1.1 Compliant (1) VGA Port PS/2 keyboard and mouse ports (1) Fast UART 16550 serial port, (1) Header
|
|
Power Notes
|
To ensure system stability, a 500W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Power Configurations: ACPI Power Management Main Switch Override Mechansim Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on
System cooling: Total of six 4-pin fans (6) Fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
3 Years
|
|
Warranty - Parts
|
3 Years
|
Motherboard, 5100, Dual QC Xeon, 1333MHz, ATX, Max 32GB DDR2, 3PCIEX8, 3PCI, 2GBE, Vid, SAS, SATA - MBD-X7DCL-3-O
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=8187981#BVSecondaryCustomerRatings