Motherboard, nForce Pro2200, Dual Opteron200, EATX, Max. 32GB, 2PCIEX16, PCIEX, 3PCIX, PCI,GBE,10Pak - MBD-H8DCI-B
- NVIDIA nForce Pro 2200 chipset supports 2 compatible processors
- Up to 32GB DDR SDRAM
- Extended ATX form factor
This is a 10 pack.
This Supermicro H8DCi EATX motherboard is designed for high end graphics applications and high performance economical workstations.
Motherboard, nForce Pro2200, Dual Opteron200, EATX, Max. 32GB, 2PCIEX16, PCIEX, 3PCIX, PCI,GBE,10Pak - MBD-H8DCI-B
|
General
|
|
|
Motherboard Form Factor
|
Extended ATX
|
|
Mainboard Type
|
Desktop
|
|
Memory
|
|
|
RAM (installed)
|
0 GB
|
|
RAM Technology
|
DDR SDRAM
|
|
RAM (max)
|
32 GB
|
|
Cache Memory (installed)
|
0 MB
|
|
Processor
|
|
|
# Processors Supported
|
2
|
|
# Processors Installed
|
0
|
|
Processor Manufacturer
|
AMD
|
|
Chipset Type
|
NVIDIA nForce Pro 2200
|
|
Compatible Processors
|
Opteron dual core
|
|
Compatible Processors
|
Opteron 2xx
|
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Storage
|
|
|
Storage Controller Type
|
SATA
|
|
Storage Controller Type
|
IDE/ATA
|
|
Video
|
|
|
Video Slot Type
|
PCI Express
|
|
Video RAM (installed)
|
0 MB
|
|
Video Card
|
No Graphics Controller
|
|
Compatibility Notes
|
Processors:
Dual 940-pin ZIF Sockets
Supports up to two Dual-Core AMD Opteron 200 Series processor(s)
Single CPU configurations are not recommended
VRM x3
Chassis optimized for H8DCi:
4U Chassis:
SC743T-645
SC743i-645
SC743T-R760
SC743i-R760
|
|
Contents
|
(10) Motherboards, cables, I/O shields, software CDs, documentation
|
|
Memory Notes
|
0GB of up to 16GB DDR 400MHz memory or up to 32GB DDR 266MHz or 333MHz memory.
There are (8) eight 184-pin DIMM sockets.
Single or Dual (recommended) channel memory support.
For Single CPU: Memory must be populated in CPU1 DIMMs only.
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks.
|
|
Physical Dimensions
|
12" x 13.1"
|
|
Ports/Connectors
|
Expansion slots: (2) PCI-e x16 slots (nVidia SLI Technology Supported), (1) PCI-e x4 (using x8) slot, (2) 64-bit PCI-X 133 / 100MHz slots, (1) 64-bit PCI-X 100MHz slot Note: Dual Processors are required for correct PCI-X expansion slot operation, (1) 32-bit PCI slot
On-board devices:
nVidia nForce Pro 2200 SATA 3.0Gbps Controller, 4 SATA ports, four SATA hard drives supported, nVidia RAID 2.0, SATA RAID 0, 1, 0+1 support
Dual ATA 133 / 100 EIDE channels support up to four UDMA IDE devices
nVidia nForce Pro 2200(CKIO4) & 2050(IO4) Dual Single-Port Gigabit Ethernet Controllers, supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
AC97 (ALC650) audio CODEC with high quality 6-channel sound, Front-side audio header
Clock Generator CK804
I/O:
(1) Floppy port; 1.44 MB, 2.88 MB, 3-mode support
(2) RJ45 LAN ports
Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible (4 rear ports, 4 internal headers)
(1) Line In / Line Out / Microphone port
PS/2 keyboard and mouse ports
(2) Fast UART 16550 serial ports
(1) ECP / EPP parallel port
|
|
Power Notes
|
To ensure system stability, a 645W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Power configurations:
ACPI/API Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode control for AC power loss recovery
Internal / External modem remote ring-on
Cooling / fan:
Total up to eight 4-pin fan status
8 Tachometer Monitoring
Status Monitor for On/Off Control
Support 3-pin fans (without speed control)
Low Noise Fan Speed Control
Pulse Width Modulated (PWM) fan connector
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
N/A
|
|
Warranty - Parts
|
N/A
|
Motherboard, nForce Pro2200, Dual Opteron200, EATX, Max. 32GB, 2PCIEX16, PCIEX, 3PCIX, PCI,GBE,10Pak - MBD-H8DCI-B
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=7177562#BVSecondaryCustomerRatings