Premium SCSI Cable : 50-pin Centronics Male to Male, 1 ft

This 3-foot SCSI cable has a VHDCI (0.8mm) 68-pin male connector on one end and a 50-pin male Centronics connector on the other. It's likely to be used in conjunction with Adaptec SCSI controller card models AHA-3940UWD and 3940UW/MAC, which feature an external 68-pin 0.8mm SCSI port. The double-shielded cable is constructed of 34 twisted pair wire.

This 6-foot SCSI cable has a VHDCI (0.8mm) 68-pin male connector on one end and a 50-pin male Centronics connector on the other. It's likely to be used in conjunction with Adaptec SCSI controller card models AHA-3940UWD and 3940UW/MAC, which feature an external 68-pin 0.8mm SCSI port. The double-shielded cable is constructed of 34 twisted pair wire.

These high quality cables allow you to connect your peripherals in confidence. This is a SCSI-2 cable, high density (micro) 50-pin male to 50-pin Centronics male cable. This cable is double shielded with both foil and braided shielding to reduce interference. The cable has 28-gauge wire, is 3 feet long and is platinum in color. This cable cannot be used...

This Is A 50-Pin Centronics Female To 50-Pin Centronics Female Gender Changer. Changes A 50-Pin Male Cable To 50-Pin Female, For Connection To A 50-Pin Male Port. This Can Be Used To Attach The Iomega Zip SCSI Drive To An Adaptec PCMCIA SCSI Adapter.

Ultra SCSI (or SCSI-3), is the latest of the ever improving SCSI standards, and is the cable of choice for such peripherals as the Iomega Zip Drive. It includes specifications for a single-ended as well as a differential bus style. The single-ended is similar to Fast SCSI-2, except it accommodates addressing up to 32 devices over a 16 bit single...

This Is A Molded HDI 30-Pin Male To Centronics 50-Pin Female Adaptor. 10" Cable. The HDI 30 End Plugs Into A Powerbook SCSI Port And The 50-pin Female Would Connect To A 50-pin Male Centronics Cable. It is for Someone Who Already Has A 50 To 50-Pin SCSI Cable Connected To A SCSI Peripheral And Needs To Connect That 50...

This is a standard SCSI System Cable, to interface with a SCSI port to a SCSI peripheral.

This Is A 3' 50-Pin Male To 50-Pin Male (Double-Shielded) SCSI Cable. It Is Typically Used To Connect Two SCSI Peripherals (Such As Two hard Drives) With 50-Pin Centronic Ports To Eachother. The Double-Twisted, Double-Shielded Cable Has Two Shields To Lessen Noise: 100% Foil Shield For High Frequency And A 95% Tinned Copper Braid For Low Frequency. It Is Designed...

A 6 Foot Scsi Cable. This Is A 25 To 50-Pin Centronics Molded Cable With Thumbscrews. Usually Used To Connect A Standard Macintosh SCSI Port To A Hard Disk. Lifetime Guarantee.

This SCSI cable has one Centronics 68-pin connector and one Micro DB50-pin connector.