Print page E-mail page

OptiView WAN Analyzer OC3

More From: Fluke Networks, Inc.

Item #: 5118956

Mfr. Part#: OPV-WAN/OC3

Availability: On Order

Est. Ship: Call for Availability

The OptiView Network Analysis Solution is an integrated suite of hardware and software that provides portable and distributed visibility across your entire enterprise.

Overview

Specs

Reviews

OptiView WAN Analyzer OC3 - OPV-WAN/OC3

The OptiView WAN Analyzer provides a complete view of your WAN link performance and facilitates rapid problem resolution from the convenience of your desktop. From any workstation, remotely access the health status of any of your WAN links from the physical layer to the application layer and even perform remote protocol analysis when necessary. Use the OptiView WAN Analyzer as an independent system or as part of an integrated management solution.

The OptiView WAN Analyzer is equipped with two traffic interfaces that can simultaneously monitor both traffic data streams of a high speed link. Full duplex traffic patterns are displayed simultaneously for all link analysis.

Each OptiView WAN Analyzer has a dedicated 10/100 Mbps Ethernet RJ-45 management port that allows it to be controlled remotely from any point on the network using the Optiview Analyzer Remote Software (included with the analyzer). Up to eight users may access any single WAN Analyzer and perform different analyses at the same time. Easily configure settings, such as SNMP Trap destinations, scope of discovery and user access privileges from any workstation running the analyzer's Remote software.

When a connection is made to an optical OC3 or OC12 WAN circuit, the OptiView WAN Analyzer continuously monitors the SONET and ATM layers, immediately identifying any problems with the physical link. Link usage is tracked for all auto-discovered VCs, providing utilization, throughput and error statistics. The most utilized or errored VCs are constantly sorted and displayed for you. The advanced discovery system then takes over to provide you with immediate information of all devices using the WAN link as well as RMON statistics, such as Top Applications, Top Talkers, Top Protocols and Top Conversations.

Actual Weight	2.80 lb(s)
Compatibility Notes	Test Access: Full duplex monitoring through a monitor port or tap connection Layer 2 Support: Asynchronous Transfer Mode (ATM) and Packet over SONET (PoS) Network Analysis Interfaces: OC3 and OC12, SM or MM (SC) Network Analysis LEDs: Signal Status (IN A and IN B) Receive Sensitivity: OC3 / OC12 WAN Analyzer: -30 dBm (typical) OC3 WAN Analyzer: -36 dBm (typical) Management Port LEDs: Link / TX (solid green for link and flashing green for activity) Shock and vibration: Meets requirements of MIL-PRF-28800F for Class 3 equipment Connection to public telephone network: Do not connect the analyzer's network interface to public telephone systems. Framing Formats: SDH (STM-1 and STM-4) ITU G.707; SONET: (STS-3c and STS-12c) GR-253-CORE, ANSI T1.105 RFC Compliance: 2684 (obsoletes 1483) Multiprotocol Encapsulation over ATM Adaptation Layer 5; 2364 PPP Over AAL5; 2819 (obsoletes 1757) RMON MIB; 2021 RMON2 MIB; 2895 RMON Protocol Indentifier Reference; SMIv2 [2011 IP, 2012 TCP, 2013 UDP]; 2558 (obsoletes 1595) SONET / SDH MIB; HC-RMON-MIB (IETF draft) RMON for High Capacity Networks; RFC 2233 (obsoletes 1573) IF-MIB. ATM Forum IEs: AF-NM-TEST-0080.000 ATM RMON MIB objects
Contents	WAN analyzer and documentation
Memory Notes	Capture Memory: 256 MB (shared between receivers)
Physical Dimensions	1.6"h x 8.3"w x 12.9"d
Ports/Connectors	Serial Configuration Port: Serial RS-232 (9-pin male) Management Port: 10Base-T / 100Base-TX (RJ-45) Ethernet, Full and Half Duplex
Returns Policy	This product is subject to our return policy. Please see our complete return policy for details.
System Requirements	Windows 98SE / NT 4.0 / 2000/XP 128 MB RAM 120 MB hard drive space 200 MHz Pentium processor 800x600 SVGA Video display Microsoft TCP / IP Stack Winsock 2.0
Warranty - Labor	N/A
Warranty - Parts	N/A

Related to Fluke Networks OptiView WAN Analyzer OC3 - OPV-WAN/OC3

Fluke Networks OptiView WAN Analyzer Ruggedized Transit Case - OPV-TCASE

This Ruggedized Transit Case is intended for use with Fluke Networks' OptiView WAN Analyzer.

Fluke Networks OptiView Link Analyzer - OPV-LA2

No one knows the value of an integrated solution better than network engineers - and Fluke Networks. The OptiView Network Analysis Solution is a breakthrough in integrated portable and distributed monitoring and analysis hardware and software.Deploying mission critical applications or troubleshooting related problems on high-speed 10/100 or 1000 Mbps switched Ethernet links requires more than good protocol analysis software. You...