DTX-1800 Kit with MMF and Singlemode FM - DTX-1800-MS-120
Fluke Networks’ DTX CableAnalyzer Series combines powerful speed and unprecedented accuracy no other certification tester can match. This revolutionary platform significantly reduces total time to certify to save you time you can see on your bottom line – as much as 33% of certification costs per year. You can certify a Cat 6 link three times faster than other testers with 9-second Cat 6 Autotest and Level IV Accuracy. The DTX also gives you 900MHz of testing bandwidth, optional on-board fiber modules, easy-to-understand diagnostics, 12-hour battery life, a bright color display, and nearly instant setup and reporting. DTX - It's all about time!
DTX-1800 Kit with MMF and Singlemode FM - DTX-1800-MS-120
|
Protocols
|
|
|
Networking Protocol
|
Gigabit Ethernet
|
|
Networking Protocol
|
Ethernet
|
|
Networking Protocol
|
Fast Ethernet
|
|
Actual Weight
|
2.40 lb(s)
|
|
Compatibility Notes
|
Cable Types: STP, FTP, SSTP and UTP
Standard Link Interface Adapters:
TIA Category 3, 4, 5, 5E and 6
ISO / IEC Class C and D
ISO/ IEC Class E, 100W ISO/ IEC Class F
Cat 6/ Class E permanent link adapters Plug type and life: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, and 6 and ISO / IEC Class C, D and E permanent link
Cat 6 / Class E channel adapters Plug type and life: shielded and unshielded cable, TIA Cat 3, 4, 5, 5e, and 6 and ISO / IEC Class C, D and E channels
Test Standards:
TIA Category 3 and 5e per TIA / EIA-568B
TIA Category 5 (1000BaseT) per TIA TSB-95
TIA Category 6 per TIA / EIA-568B.2-1 (Addendum #1 to TIA / EIA-568B.2)
ISO / IEC 11801 Class C, D, and E
ISO / IEC 11801 Class F (DTX-1800 only)
EN 50173 Class C, D, E
EN 50173 Class F (DTX-1800 only)
ANSI TP-PMD
IEEE 802.3 10BaseT, 100BaseTX, 1000BaseT
IEEE 802.5 (STP cabling, IBM Type 1) Token Ring, 4 Mbps and 16 Mbps
Speed of Autotest:
Full 2-way Autotest of Category 6 Twisted-Pair links in 12 seconds or less
Full 2-way Autotest of ISO / IEC Class F links in 32 seconds
Supported Tests Parameters:
(The selected test standard determines the test parameters and the frequency range of the tests)
Wire Map
Length
Propagation Delay
Delay Skew
DC Loop Resistance
Insertion Loss (Attenuation)
Return Loss (RL), RL at Remote
NEXT, NEXT at Remote
Attenuation-to-crosstalk Ratio (ACR), ACR at Remote
ELFEXT, ELFEXT at Remote
Power Sum ELFEXT, PSELFEXT at Remote
Power Sum NEXT, PSNEXT at Remote
Power Sum ACR, PSACR at Remote
Cable Tone Generator:
Generates tones that can be detected by a tone probe such as a Fluke Networks IntelliTone probe. The tones are generated on all pairs. Frequency range on all pairs. Frequency range of tones: 440 Hz to 831 Hz
Display:
3.7 in (9.4 cm) diagonal, 240 dots wide by 320 dots high, passive color, transmissive LCD with backlight.
Input Protection
Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage.
Case
High impact plastic with shock absorbing overmold
|
|
Contents
|
Main unit, remote unit, software, adapters, modules, AC adapter, carrying case, documentation
|
|
Physical Dimensions
|
8.5"h x 4.4"w x 2.4"d
|
|
Power Notes
|
Main unit and remote: lithium-ion battery pack, 7.4V, 4000mAh
Typical battery life: 12 to 14 hours
Charge time (with tester off): 4 hours (below 40 °C)
AC adapter / charger, USA version: linear power supply; input 108VAC to 132VAC, 60Hz; output 15VDC, 1.2A
Memory backup power in main unit: lithium battery
Typical life of lithium battery: 5 years
|
|
Returns Policy
|
This product is subject to our return policy. Please see our complete return policy for details.
|
|
Warranty - Labor
|
1 Year
|
|
Warranty - Parts
|
1 Year
|
DTX-1800 Kit with MMF and Singlemode FM - DTX-1800-MS-120
http://www.pcconnection.com/IPA/Shop/Product/Detail.htm?sku=6529001#BVSecondaryCustomerRatings